cylinder block
美 
英
英汉解释
英英解释
例句
This equipment specially used for engine cylinder block and head of water jacket and oil leakage of tao detection.
本设备专门用于对发动机缸体、缸盖水套及油道的泄漏检测；
The test can determine the reliability and the anti-fatigue service life of the engine cylinder block.
通过试验可以确定发动机气缸体的可靠性和耐疲劳寿命。
The principles to construct finite element model for modal analysis of the cylinder block have been obtained.
通过研究，得出了建立内燃机机体的有限元模型的一些原则。
For the upper part of the cylinder block, as the lower part of the crankcase.
缸体上部为汽缸、下部为曲轴箱。
push cylinder block can push number sender out of the reset position.
推块气缸能够将发号块推离复位位置。
This paper analyzes the cylinder block structure, two types of gating system are designed: top gating system and step gating system.
本文分析了缸体结构，设计了两种浇注系统：顶注式和阶梯注入式浇注系统。
The mechanism consists of several parts like crankcase, cylinder block, pistons, connecting rod, crankshaft, etc.
这一机构有一系列部件组成，如曲柄箱、气缸体、活塞、连杆、曲轴等。
The conclusions are employed in cold-setting furan resin sand mould (core) in production of cylinder block of heavy marine diesel engine.
所得结果在呋喃树脂自硬砂型（芯）大型船用柴油机缸体铸铁件生产中得到验证和应用。
Before any service operations are performed, the cylinder Block should be cleaned and inspected.
气缸和气缸体的维修在进行任何维修工作之前，应对气缸体进行清洁处理和探伤检查。
The oil pan and the lower part of the cylinder Block together are called the crankcase; they enclose, or encase , the crankshaft.
油盘和气缸体的下部共同称为曲轴箱，用来封闭或罩住曲轴。
The engine featured a one-piece crankcase and cylinder block, a single cam with rocker arms actuating tappets to control the valves.
发动机精选一件曲轴和缸体，一个单一的凸轮与摇臂武器启动挺杆控制阀。
HINT: Keep the upper bearing and upper thrust washers together with the cylinder block.
提示：请上轴承和止推垫圈上与缸体。
Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble ).
从汽缸体上卸去曲轴（参看“汽缸体-拆卸”）。
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
从汽缸体拆下引擎汽缸盖（请参阅本部分之汽缸盖拆卸）。
We mainly produce the cylinder block and cylinder head castings.
我们主要生产汽缸体和汽缸盖铸件。
The leakage defects of cylinder block of 4DA1 engine occurred mainly in bolt holes, oil channels.
4DA1发动机气缸体渗漏缺陷部位主要集中在螺栓孔、油道处；
The cylinder block is a one piece casting of special-alloy cast iron.
缸体是一种特殊的合金铸铁整体铸造。
The metallurgical quality of cylinder block and head of D114 diesel engine was analyzed.
对D114柴油机缸体、缸盖铸件冶金质量进行了分析。
The cylinder block contains the pistons.
气缸体内有活塞。
The three lower rings are located in machined grooves in the cylinder block.
三个较低环坐落在缸体加工沟槽。
In this paper, based on the structure of cylinder block, the gating system and overflow well are designed.
本文首先根据缸体结构特征，设计了浇注系统和溢流系统；
A Study on High strength Alloyed Cast Iron Used for Heavy- Section Cylinder Block of Large Compressor
高强度厚壁大型合金灰铸铁压缩机气缸体材质的试验研究
Pushing cylinder block is fixed on the track through cylinder, close to switching logic control system connecting PLC;
其中推块气缸通过气缸座焊接在积放轨道上，接近开关连接逻辑控制系统PLC；
A Finite Element Modeling and Modal Analysis of the Cylinder Block of a Diesel Engine
柴油机机体有限元建模及模态分析
Manufacture and Application of Thin Wall Casting Cylinder Block Used in New Type Diesel Engine
新型薄壁柴油机缸体铸件的研制与应用
Vibration Reduction and Modal Analysis of a Cylinder Block of Diesel Engine
柴油机机体的模态分析与减振设计
Numerical Simulation of Thermal Stress of Diesel Engine Cylinder Block Castings Under Two Different Constraints
两种不同约束条件下发动机缸体铸件热应力场的数值模拟
Analysis on Thermal Load of a Modified Gasoline Engine Cylinder Block
某改型汽油机机体热负荷分析
Layout Design of A Flexible Production Line for Machining of Cylinder Block of 4-Cylinder Diesel Engine
4缸柴油机机体加工柔性生产线的方案设计
The Study of the Application of the High-Speed and Heavy-Cutting Special Fixture of Machining Cylinder Block of Milling Machine
加工柴油机机体大进给量高速强力铣削专用夹具的应用研究
Study on the Cylinder Block Design Technology of Small Type Internal-combustion Engine for Remanufacture
面向再制造的小型内燃机机体设计技术研究
Development and Application of High Strength Grey Iron Automobile Engine Cylinder Block Casting
高强度灰铸铁汽车发动机缸体铸件的研制与应用
Quality-control and Production of the Die Casting Cylinder-Block and Transmission Case
发动机缸体与变速箱壳体压铸生产及质量控制
Analysis and Prevention Method for Shelling of Cylinder-Crankcase Core of D-Series Diesel Cylinder Block
柴油机缸体缸筒-曲轴箱砂芯脱壳分析及解决
Application of Ultrasonic Technology to Cleaning Cylinder Block of Diesel Engines
超声波技术在柴油机机体清洗上的应用
Machining the Inner Hole Measurements of the Cylinder Block with the Same Datum
用同一基准加工缸体的内孔尺寸
Production and analyses and repair of the crackle of cylinder block and cylinder head
气缸体与气缸盖的裂纹产生、检验与修理
Production Practice to Improve Machinability of Bottom Cylinder Block
改善发动机下气缸体加工性能的生产实践
Research on Cylinder Block and Cylinder Head Core Assembly Vertical Casting Process
缸体缸盖组芯立浇工艺的研究
Finite Element Modality Analysis of Cylinder Block of Multi- Cylinder Diesel Engine
多缸柴油机机体结构有限元模态分析
